The Bottle Matic is designed to make label application easier & faster when applying labels in a small production environment. It offers consistent, straight, smooth label application at speed.
The Bottle Matic 2 label applicator is a double label system. This will apply both front and back labels in one pass. You will need to have your labels printed front then back for this to work. You can still just apply single labels if you need to. There is a simple pedal button for one push application.
This applicator is available in three different widths. 6″ (152mm), 10″ (250mm) & 16″ (406mm)
Each Bottle-Matic can be adapted to work with tapered, ridged or odd shaped containers, just send us a sample of your product and we will advise you of the cost for any modifications that may be required.
For containers under 38mm in diameter and lightweight containers a pressure arm is fitted as standard.
Up to 1200 pieces per hour dependent on length of label and speed of operator
Up to 40cm (containers can be longer with neck overhang)
12mm to 250mm (for containers smaller than 38mm diameter the pressure arm is needed)
From 12mm to 380mm (38mm minimum backing is recommended)
Standard 22cm, (with optional roll adaptor up to 38cm)
76mm internal diameter (full width of backing paper recommended)
For Bottle-Matic II only + or – 3mm adjustable in 2.54mm increments
Manual loading and foot switch
230V 50HZ (115v 60HZ available on request)
53cm long x 43cm wide x 20cm high
We’re on hand, when you need usLet’s Chat